Категории: ,

Коммутатор управляемый L2 GCOM S5100-28PC

  • 20*10/100/1000Base-T портов с поддержкой POE
  • 4*Combo GE
  • 16K Jumbo, 8K MAC address, 4K VLAN, QinQ
  • 256ACL с привязкой IP+MAC+Port+VLAN
  • Максимальное энергопотребление без POE до 30 W
  • Поддерживаемые стандарты POE 802.3af и 802.3at
  • Максимальная мощность до 32W на порт или до 400W на коммутатор

Коммутатор серии S5100 с POE — это новое поколение интеллектуальных гигабитных коммутаторов операторского класса. Являясь ведущим высокопроизводительным коммутатором POE, коммутаторы серии S5100 обеспечивают большие емкости, высокую плотность GE-портов, что полностью удовлетворяет спрос клиентов экономически эффективным гигабитным доступом. Коммутаторы S5100 POE удовлетворяют стандарту IEEE 802.3af и 802.3at. Максимальная потребляемая мощность каждого порта составляет 32 Вт, а вся потребляемая мощность может достигать 400 Вт.

Share it:

Основные характеристики

Backplane capacity 68Gbps
Interface switching capacity  56Gbps
Forwarding Capacity 41.7Mpps
Memory and Storage 64MB SDRAM memory and 8MB flash
POE features  Satisfy 802.3af and 802.3at standard, max power consumption supply of single port is 32W
Power Consumption Full-loaded≤30W (without POE)
Dimensions (Width x Depth x Height) 440mm*44mm*359mm
Weight (Full-Loaded) ≤5kg
Environmental Requirements Working temperature:-15°C~55°C
Storage temperature:-40°C~70°C
Relative humidity:10%~90%,non-condensing

Детальные характеристики

L2 Features MAC 8K MAC address
MAC Black Hole
Port MAC Limit
VLAN 4K VLAN entries
Port based QinQ
PVLAN to realize port isolation and saving public-vlan resources
Spanning Tree STP/RSTP/MSTP
Remote loop detecting
Port Bidirectional bandwidth control, configure entry/exit and the smallest 64K
control particle
Static and LACP
Port- mirroring of 1:1 or N:1
Security Feature User’s Security ARP anti-Flooding, configure ARP traffic safety threshold and inhibition
ARP packet
ARP anti-Spoofing, configure ARP inner and outer MAC check and static
ARP checklist and drop / flood action
IP+MAC+port+VLAN binding manually
Port Isolation, configure hardware isolation of each port 文
Bind MAC address to port and MAC address filtration on port
IEEE 802.1x and AAA/Radius authentication
Device Security Anti-DOS attack
SSHv2 Secure Shell
SNMP v3 encryption
Telnet based on Security IP
Prevent unauthorized user
Network Maintenance One button binding based on dynamic ARP table
Manual binding parameter of IP 、VLAN ID、MAC and port etc.
L2-L7 ACL flow filtration
Auto-shutdown port in storm
Update user’s location through DHCP Option82 and PPP
Service Features ACL Activate standard and extended ACL
Time Range ACL strategy
Flow classification based on SMAC、DMAC、VLAN、SIP、DIP、IP, IP(IPv4/IPv6) 、TCP/UDP port num、 protocol type etc.
Packet filtration of L2~L7 IP header with 80bytes
QoS Rate-limit to packet sending/receiving speed of port or self-defined flow and provide general flow monitor and two-speed tri-color monitor of self-defined flow
Packet mirror and redirection of interface and self-defined flow Supports
Priority remark to port or self-defined flow and provide 802.1P, DSCP priority and Remark
Super queue scheduler based on port and self-defined flow. Each port/flow supports 8 priority queues and scheduler of SP, WRR and SP+WRR
Multicast IGMPv1/v2/v3 Snooping
IGMP Filter
MVR multicast VLAN register and cross VLAN multicast replication
IGMP Fast leave
IGMP Proxy
Reliability Loop Protection EAPS and GERP
Link Protection FlexLink
Device Protection Backup of host program and configuration files
Maintenance Network Maintenance Port real-time, utilization and transmit/receive statistic based on CLI
Port real-time, utilization and transmit/receive statistic based on CLI
802.3ah Ethernet OAM
Syslog and RFC 3164 BSD syslog Protocol
Ping and Traceroute
Device Management CLI, Console port, Telnet and WEB
RMON (Remote Monitoring)1,2,3,9 group MIB
GN.LinkⅡ Server
NGBNView network management

GCOM S5100-28PC manual



GCOM S5100-28PC datasheet