Categories: ,

Optical line terminal EPON OLT GCOM EL5610-08P

This model is included in a replacement fund

  • 1+1 power redundancy
  • 8* fixed EPON port
  • 4*10GE SFP and 8* GE
  • 1* console port
  • full-load power consumption≤45 W


EPON EL5610-08P is an optical line terminal in a 1U high-integrity enclosure, used by operators to build networks in small towns and urban-type settlements. The EPON EL5610-08P features a large capacity, high reliability, completeness of software features and bandwidth efficiency.
The GCOM EL5610-08P terminal has 8 EPON ports, 8 * GE Ethernet ports and 4 * 10G SFP for APLINK, 1 console port. Supports many routing protocols, have high fault tolerance and compatibility with the equipment of different brands. It is widely used to cover the network operator, the creation of a private network, access to campuses and the construction of an access network in small settlements. Official warranty and support from the manufacturer.

Share it:

Optical line terminal EPON OLT GCOM EL5610-08P

Main Features:

Switching Capacity 128Gbps
Forwarding Capacity(Ipv4/Ipv6) 95.23Mpps
Service Port 8*PON port, 4*10GE/GE SFP +8GE
Redundancy Design Built-in double power supply, including AC, double DC, AC+DC, single AC, single DC distinguished via model
Power Supply AC: input100~240V 47/63Hz
DC: input36V~75V
Power Consumption ≤45W
Dimensions (Width x Depth x Height) 440mm×44mm×311mm
Weight (Full-Loaded) ≤3kg
Environmental Requirements Working temperature: -10°C~55°C
Storage temperature: -40°C~70°C
Relative humidity: 10%~90%, non-condensing

Detailed Features EPON OLT GCOM EL5610-08P:

PON Features IEEE 802.3ah EPON
China Telecom/Unicom EPON
Maximum 20 Km PON transmission distance
Each PON port supports the max. 1:64 splitting ratio
Uplink and downlink triple churning encrypted function with 128Bits
Standard OAM and extended OAM
ONU batch software upgrade, fixed time upgrade, real time upgrade
PON transmit and inspect receiving optical power
PON port optical power detection
L2 Features MAC MAC Black Hole
Port MAC Limit
16K MAC address
VLAN 4K VLAN entries
Port-based/MAC-based/protocol/IP subnet-based
QinQ and flexible QinQ (StackedVLAN)
VLAN Swap and VLAN Remark
PVLAN to realize port isolation and saving public-vlan resources
Spanning Tree STP/RSTP/MSTP
Remote loop detecting
Port Bi-directional bandwidth control
Static link aggregation and LACP(Link Aggregation Control Protocol)
Port mirroring
Security Features User’s Security Anti-ARP-spoofing
IP Source Guard create IP+VLAN+MAC+Port binding
Port Isolation
MAC address binding to the port and MAC address filtering
IEEE 802.1x and AAA/Radius authentication
Device Security Anti-DOS attack(such as ARP, Synflood, Smurf, ICMP attack), ARP
detection, worm and Msblaster worm attack
SSHv2 Secure Shell
SNMP v3 encrypted management
Security IP login through Telnet
Hierarchical management and password protection of users
Network Security User-based MAC and ARP traffic examination
Restrict ARP traffic of each user and force-out user with abnormal ARP traffic
Dynamic ARP table-based binding
IP+VLAN+MAC+Port binding
L2 to L7 ACL flow filtration mechanism on the 80 bytes of the head of user-defined packet
Port-based broadcast/multicast suppression and auto-shutdown risk port
URPF to prevent IP address counterfeit and attack
DHCP Option82 and PPPoE+ upload user’s physical location Plaintext authentication of OSPF, RIPv2 and BGPv4 packets and MD5
cryptograph authentication
IP Routing IPv4 ARP Proxy
DHCP Relay
DHCP Server
Static Routing
Equivalent Routing
Routing Strategy
ICMPv6 Redirection
Configured Tunnels
6to4 Tunnels
Dual stack of IPv6 and IPv4
Service Features ACL Standard and extended ACL
Time Range ACL
Flow classification and flow definition based on source/destination MAC address, VLAN, 802.1p, ToS, DiffServ, source/destination IP(IPv4/IPv6) address, TCP/UDP port number, protocol type, etc
packet filtration of L2~L7 deep to 80 bytes of IP packet head
QoS Rate-limit to packet sending/receiving speed of port or self-defined flow and provide general flow monitor and two-speed tri-color monitor of self-defined flow
Priority remark to port or self-defined flow and provide 802.1P, DSCP
priority and Remark
CAR(Committed Access Rate), Traffic Shaping and flow statistics
Packet mirror and redirection of interface and self-defined flow
Super queue scheduler based on port or self-defined flow. Each port/
flow supports 8 priority queues and scheduler of SP, WRR and
Congestion avoid mechanism, including Tail-Drop and WRED
Multicast IGMPv1/v2/v3
IGMPv1/v2/v3 Snooping
IGMP Filter
MVR and cross VLAN multicast copy
IGMP Fast leave
IGMP Proxy
MLDv2/MLDv2 Snooping
Reliability Loop Protection EAPS and GERP (recover-time <50ms)
Link Protection FlexLink (recover-time <50ms)
RSTP/MSTP (recover-time <1s)
LACP (recover-time <10ms)
Device Protection VRRP host backup
1+1 power hot backup
Maintenance Network Maintenance Port real-time, utilization and transmit/receive statistic based on Telnet
RFC3176 sFlow analysis
802.3ah Ethernet OAM
RFC 3164 BSD syslog Protocol
Ping and Traceroute
Device Management CLI, Console port, Telnet
RMON (Remote Monitoring)1, 2, 3, 9 groups MIB
NGBNView network management

EPON OLT GCOM EL5610-08P firmware



GCOM EPON configuration



GCOM EL5610-08P manual



GCOM EL5610-08P datasheet