Categories: ,

Optical Line Terminal GPON OLT GCOM GL5610-16P


This model is included in a Replacement fund

  • 1+1power redundancy
  • 16* fixed GPON port
  • 4*GE COMBO port, 2*10GE SFP+ port
  • 1*console port, 1*AUX(outband management interface)

GL5610-16P is a highly integrated optical line terminal in a 1U package, used by operators to build networks in small cities and urban-type settlements. The GL5610-16P is distinguished by its high capacity, high reliability, full software functions and bandwidth efficiency.
The GCOM GL5610-16P terminal has 16 GPON ports, 4 * GE COMBO ports and 2 * 10G SFP + for the organization of uplinks, 1 console port. It supports many routing protocols, has high fault tolerance and compatibility with equipment of various brands. It is widely used to cover the operator’s network, create a private network, access campuses and build an access network in small communities. Official warranty and support from the manufacturer.


Share it:

Main Features

Switching Capacity 108Gbps
Forwarding Capacity(Ipv4/Ipv6) 95.232MPPS
Service Port 16*PON port
4*GE COMBO port
2*10GE SFP+ port
Redundancy Design Dual power supply
Support AC input, double DC input and AC+DC input
Power Supply AC: input 90~264V 47/63Hz;
DC: input -36V~-72V;
Power Consumption ≤110W
Dimensions (Width x Depth x Height) 440mm×44mm×380mm
Weight (Full-Loaded) ≤6,5kg
Environmental Requirements Working temperature: -10°C~55°C
Storage temperature: -40°C~70°C
Relative humidity: 10%~90%, non-condensing

Detailed Features

PON Features ITU-TG.984.x;
SN/Password/SN+ Password/LOID/LOID Password/LOID+LOID Password authentication modes;
Terminal access up to 60km on a single fiber;
1:64 split ratio on single PON port, scalable to 1: 128 split ratio;
DBA algorithm, and the particle is for 64Kbps;
Standard OMCI management function;
ONU batch software upgrade;
PON port optical parameter detection;
L2 Features MAC MAC Black Hole;
Port MAC Limit;
64K MAC (packet exchange chip cache 2MB,External cache 720MB );
VLAN 4K VLAN entries;
Port-based VLAN classification;
Uplink static QinQ and flexible QinQ(Stack VLAN);
Uplink VLAN Swap and VLAN Remark;
GVRP;
Spanning Tree STP/RSTP/MSTP
Remote loop detecting
Port Bi-directional bandwidth control;
Support static and LACP dynamic port aggregation;
Port mirroring;
Security Features User’s Security Anti-ARP-spoofing;
Anti-ARP-flooding;
IP Source Guard for creating IP+ VLAN+ MAC+ Port binding;
Port Isolation;
MAC address binding to the port and MAC address filtering;
IEEE 802.1x and AAA/Radius authentication;
Device Security Support the control layer to prevent a variety of DOS attacks and virus attacks against the CPU;
SSHv2 Secure Shell;
SNMP v3 encrypted management;
Login Security IP via Telnet;
Hierarchical management and password protection of users;
Network Security User-based MAC and ARP traffic examination;
Restrict ARP traffic of each user and force-out user with abnormal ARP traffic;
Dynamic ARP table-based binding;
IP + VLAN + MAC + Port binding;
L2 to L7 ACL flow filtration mechanism on the 80 bytes of the head of user-defined packet;
Port-based broadcast/multicast suppression and auto-shutdown risk port;
URPF to prevent IP address counterfeit and attack;
DHCP Option82 and PPPoE+ upload user’s physical location Plaintext authentication of OSPF, RIPv2 packets and MD5cryptograph authentication;
Service Features ACL Standard and extended ACL;
Time Range ACL;
Flow classification and flow definition based on source/destination MAC address, VLAN, 802.1p, ToS, DiffServ, source/destination IP(IPv4/IPv6) address, TCP/UDP port number, protocol type, etc;
packet filtration of L2~L7 deep to 80 bytes of IP packet head;
QoS Rate-limit to packet sending/receiving speed of port or self-defined flow and provide general flow monitor and two-speed tri-color monitor of self-defined flow;
CAR(Committed Access Rate),Traffic Shaping and flow statistics;
Packet mirror and redirection of interface and self-defined flow;
Supports priority marking of ports or custom flows and provides 802.1p, DSCP-priority Remark capability;
Super queue scheduler based on port or self-defined flow. Each port/flow supports 8 priority queues and scheduler of SP, WRR and SP+WRR;
Congestion Avoidance Mechanism, including Tail-Drop and WRED;
IPv4 ARP Proxy;
DHCP Relay;
DHCP Server;
Static Routing;
RIPv1/v2;
OSPFv2/V3;
Equal-cost multi-path routing;
Policy-based routing;
Routing policy
IPv6 ICMPv6;
ICMPv6 Redirection;
DHCPv6;
ACLv6;
IPv6 and IPv4 dual stack;
Multicast IGMPv1/v2/v3;
IGMPv1/v2/v3 Snooping;
IGMP Filter;
MVR and cross VLAN multicast copy;
IGMP Fast leave;
IGMP Proxy;
PIM-SM/PIM-DM/PIM-SSM;
MLDv2/MLDv2 Snooping;
Reliability Loop Protection EAPS and GERP
Loopback-detection
Link Protection FlexLink (recover-time <50ms);
RSTP/MSTP (recover-time <1s);
LACP (recover-time <10ms);
BFD;
Device Protection VRRP host backup
1+1 power hot backup
Maintenance Network Maintenance Port real-time, utilization and transmit/receive statistic
RFC3176 sFlow analysis;
LLDP;
GPON OMCI;
Data Logging and RFC 3164 BSD syslog Protocol;
Ping and Traceroute;
Device Management Console port, Telnet, SSH management;
Out-band management;
SNMPv1/v2/v3;
RMON (Remote Monitoring)1,2,3,9 groups MIB;
NTP;
NGBNView network management;

GPON OLT GCOM GL5610-16P firmware

Download

Firmware

GCOM GL5610-16P Guide upgrade firmware

Download

Guide upgrade firmware

GCOM GL5610-16P Manual

Download

Manual

GCOM GL5610-16P Datasheet

Download

Datasheet