Коммутаторы GCOM

• 24 * 100/1000BaseT
• 4 * ComboGE
• 8K MAC address
• AC: 220V
• Forwarding Capacity – 41,7Mpps
• Backplane – 56Gbps
• Power < 20W

The S5110-28TC is a high-density port access switch and L2 feature set.
The GCOM S5110-28TC switch has onboard 24 * 100 / 1000Base-T and 4 * GE Combo ports (support 100 / 1000BaseX SFP or 100 / 1000BaseT). It supports the necessary set of functions for the organization of quality service, as well as the function of cable diagnostics, DDM and protection against static.

• 24*10/100/1000Base-T with POE support
• 4*Combo GE
• 16K Jumbo, 16K MAC address, 4K VLAN, QinQ
• 1024ACL with IP+MAC+Port+VLAN binding
• WEB/SNMP/Telnet
• AC220 or DC-48V

The S5300 Series Switch with POE is a new generation of carrier-class intelligent gigabit switches. As the leading high-performance POE switch, the S5300-28PC switches provide large capacities, high density of GE ports, which fully meets the customers' demand with cost-effective gigabit access. These switches support the IEEE 802.3af and 802.3at standard. 4 * Combo GE ports and 24 * 10/100 / 1000Base-T ports with POE support.

• 8*10/100BaseT
• 4K MAC, 16*802.1Q VLAN
• Remote WEB control
• Modify device configuration by NMS to upgrade by batch
• IGMP Snooping
• Full-loaded power-consumption< 7W
• Support AC220 or AC60V

S2000B series switches are the new generation Web L2 accessing switches for carrier-class and enterprise network. It has full wire-speed switching capacity compatible with NGBN unified software operation system to provide rich features by web management. It supports 802.1Q VLAN and port based VLAN, port bi-directional bandwidth limiting and port mirroring, IGMP Snooping v1/v2 multicast and port based/802.1p/ToS queue scheduling, loop detection and TCP/UDP packet filtering. All ports has the protection of over 4KV lightning, the power supports over 2KV surge protection to satisfy the class-carrier network security accessing requirements.

• FE Port – 8*10/100 Base-T
• Forwarding Capacity – 1.19Mpps
• 4K MAC , 16 *802.1QVLAN
• Backplane – 8.8Gbps
• Power Consumption – ≤7W
• Remote WEB management
• Modify device configuration by NMS to upgrade by batch
• 1port provide -48V DC to upward port

S2008B-P series are client-powered reverse feeding switches based on S2000B series published , they aim to corridor device due to class-carrier network is difficult to take power,they can satisfy green energy access requirements with client usages by special client power supply module which is share power from more users. S2008B-P series provide L2 forwarding speed, the first port supports DC -48V to upward port, other ports are received power from clients.The powered ports configure to shut down automatically if not getting power.These series support 802.1Q VLAN and port VLAN,port bidirectional
bandwidth control and mirroring, all ports endure over 4KV lightning , power has over 2KV surge protection to fulfill with L2 security access requirements in the class-carrier network which taking power from clients.

• 8*10/100BaseT
• 1*100BaseX SFP
• 4K MAC, 16*802.1Q VLAN
• Remote WEB control
• Modify device configuration by NMS to upgrade by batch
• IGMP Snooping □ Full-loaded power-consumption< 8W
• Support AC220 or AC60V

S2000B series switches are the new generation Web L2 accessing switches for carrier-class and enterprise network. It has full wire-speed switching capacity compatible with NGBN unified software operation system to provide rich features by web management. It supports 802.1Q VLAN and port based VLAN, port bi-directional bandwidth limiting and port mirroring, IGMP Snooping v1/v2 multicast and port based/802.1p/ToS queue scheduling, loop detection and TCP / UDP packet filtering. All ports has the protection of over 4KV lightning, the power supports over 2KV surge protection to satisfy the class-carrier network security accessing requirements.

• FE Port – 16*10/100 Base-T
• Forwarding Capacity – 2.38Mpps
• Backplane – 8.8Gbps
• 4K MAC, 16*802.1Q VLAN
• Remote WEB control
• Modify device configuration by NMS to upgrade by batch
• IGMP Snooping
• Full-loaded power-consumption< 10W
• Support AC220 or AC60V

S2000B series switches are the new generation Web L2 accessing switches for carrier-class and enterprise network. It has full wire-speed switching capacity compatible with NGBN unified software operation system to provide rich features by web management. It supports 802.1Q VLAN and port based VLAN, port bi-directional bandwidth limiting and port mirroring, IGMP Snooping v1/v2 multicast and port based/802.1p/ToS queue scheduling, loop detection and TCP / UDP packet filtering. All ports has the protection of over 4KV lightning, the power supports over 2KV surge protection to satisfy the class-carrier network security accessing requirements.

• FE Port – 16*10/100 Base-T
• Forwarding Capacity – 2.38Mpps
• 4K MAC , 16 *802.1QVLAN
• Backplane – 8.8Gbps
• Power Consumption – ≤10W
• Remote WEB management
• Modify device configuration by NMS to upgrade by batch
• 1port provide -48V DC to upward port

S2008B-P series are client-powered reverse feeding switches based on S2000B series published, they aim to corridor device due to class-carrier network is difficult to take power,they can satisfy green energy access requirements with client usages by special client power supply module which is share power from more users. S2008B-P series provide L2 forwarding speed, the first port supports DC -48V to upward port, other ports are received power from clients.The powered ports configure to shut down automatically if not getting power. These series support 802.1Q VLAN and port VLAN,port bidirectional
bandwidth control and mirroring, all ports endure over 4KV lightning , power has over 2KV surge protection to fulfill with L2 security access requirements in the class-carrier network which taking power from clients.

• 15*10/100BaseT
• 1*100BaseX SFP
• 4K MAC, 16*802.1Q VLAN
• Remote WEB control
• Modify device configuration by NMS to upgrade by batch
• IGMP Snooping
• Full-loaded power-consumption< 11W
• Support AC220 or AC60V

S2000B series switches are the new generation Web L2 accessing switches for carrier-class and enterprise network. It has full wire-speed switching capacity compatible with NGBN unified software operation system to provide rich features by web management. It supports 802.1Q VLAN and port based VLAN, port bi-directional bandwidth limiting and port mirroring, IGMP Snooping v1/v2 multicast and port based/802.1p/ToS queue scheduling, loop detection and TCP / UDP packet filtering. All ports has the protection of over 4KV lightning, the power supports over 2KV surge protection to satisfy the class-carrier network security accessing requirements.

• FE Port – 24*10/100 Base-T
• Forwarding Capacity – 6.55Mpps
• Backplane – 19.2Gbps
• Power Consumption – ≤12W
• 4K MAC, 26*802.1Q VLAN
• Remote WEB control
• Support AC220 or AC60V

S2000B series switches are the new generation Web L2 accessing switches for carrier-class and enterprise network. It has full wire-speed switching capacity compatible with NGBN unified software operation system to provide rich features by web management. It supports 802.1Q VLAN and port based VLAN, port bi-directional bandwidth limiting and port mirroring, IGMP Snooping v1/v2 multicast and port based/802.1p/ToS queue scheduling, loop detection and TCP / UDP packet filtering. All ports has the protection of over 4KV lightning, the power supports over 2KV surge protection to satisfy the class-carrier network security accessing requirements.

• 23*10/100BaseT
• 1*100BaseX SFP
• 4K MAC, 26*802.1QVLAN
• Remote WEB control
• IGMP Snooping
• Full-loaded power-consumption<13W
• Support AC220 or AC60V

S2000B series switches are the new generation Web L2 accessing switches for carrier-class and enterprise network. It has full wire-speed switching capacity compatible with NGBN unified software operation system to provide rich features by web management. It supports 802.1Q VLAN and port based VLAN, port bi-directional bandwidth limiting and port mirroring, IGMP Snooping v1/v2 multicast and port based/802.1p/ToS queue scheduling, loop detection and TCP / UDP packet filtering. All ports has the protection of over 4KV lightning, the power supports over 2KV surge protection to satisfy the class-carrier network security accessing requirements.

• FE Port – 24*10/100 Base-T
• Expansion Port – 2*ComboGE
• Forwarding Capacity – 6.55Mpps
• Backplane – 19.2Gbps
• Power Consumption – ≤16W
• 4K MAC, 26*802.1Q VLAN
• Remote WEB control
• Support AC220 or AC60V

S2000B series switches are the new generation Web L2 accessing switches for carrier-class and enterprise network. It has full wire-speed switching capacity compatible with NGBN unified software operation system to provide rich features by web management. It supports 802.1Q VLAN and port based VLAN, port bi-directional bandwidth limiting and port mirroring, IGMP Snooping v1/v2 multicast and port based/802.1p/ToS queue scheduling, loop detection and TCP / UDP packet filtering. All ports has the protection of over 4KV lightning, the power supports over 2KV surge protection to satisfy the class-carrier network security accessing requirements.

• 8*10/100Base-T with POE power supply
• 1/2*ComboGE+ (100/1000M BaseX SFP or 100/1000M BaseT)
• 10K Jumbo, 16K MAC address, 4K VLAN, QinQ
• 460 ACL with controlling depth of L4
• Full-loaded power-consumption is lower than 14W（without POE supply)
• POE supply satisfy 802.3af and 802.3at
• Max power consumption supply of single port is 40 W
• Forwarding Capacity – 4.2Mpps
• Backplane- 20Gbps

S2600 POE series Ethernet switches are developed by GCOM as a new generation carrier access Ethernet POE devices. These series not only provide high bandwidth transmitting , but also provide remote power supply based on IP terminal devices S2600 POE switches satisfy IEEE standard of 802.3af and 802.3at. The maximum power consumption of each port is 32W, the whole power consumption can reach 400W.

Short descritopn of Switch L2 GCOM S2600-28SC

• 24*100Base-X SFP
• 2*GE Combo, 2*SFP (100/1000BaseX )
• 16K MAC address
• Forwarding Capacity – 9.6Mpps
• Backplane – 40Gbps
• Power – 37W
• Power type AC

S2600-28SC is a high-density port access switch and L2 feature set.

GCOM S2600-28SC switch has 24 ports of 100Base-X SFP, 2 * GE Combo ports (support 100 / 1000BaseX SFP or 100 / 1000BaseT) and 2 * SFP ports (100 / 1000BaseX). It supports the necessary set of functions for the organization of quality service, as well as the function of cable diagnostics, DDM and protection against static.

• 24*10/100Base-T
• 4 * GE Combo Port
• 16K MAC address
• Forwarding Capacity – 9.6Mpps
• Backplane – 40Gbps
• Power – 28W
• AC220 and DC48V

The S2600-28TC is a high-density port access switch and L2 feature set.
The GCOM S2600-28TC switch has 24 ports of 10 / 100Base-T, 4 * GE Combo ports (support 100 / 1000BaseX SFP or 100 / 1000BaseT). It supports the necessary set of functions for the organization of quality service, as well as the function of cable diagnostics, DDM and protection against static.

• 48*10/100 Base-T
• 4*GE SFP
• 16K MAC address
• Forwarding Capacity – 13.1Mpps
• Backplane – 72Gbps
• Power – 45W
• AC220 and DC48V

S2600 is developed by GCOM to carry multiple Ethernet services, applying to various Ethernet access scenarios. Based on high-performance hardware of a new generation and the intelligent CPU, S2600 provides abundant and flexible service features, ensuring operability, manageability, and expansibility. Moreover, S2600 also supports strong ACL functions, port QinQ, flexible QinQ, 1:1 and N: 1 VLAN switch to flexibly deploy VLANs.

• FE Port – 8*10/100 Base-T
• Expansion Port – 2* GE Combo
• 8K MAC address
• Forwarding Capacity – 4.17Mpps
• Backplane – 5.6Gbps
• Power Consumption – ≤8W
• AC220V

S2610 adopts IEEE 802.3az standard, providing low-cost application for Ethernet Base-T receiver (100Mb, 1GbE and 10GbE) and low-power idle application for backplane physical layer. When the device in the period of low utilization or idle, it will disconnect the power connection firstly, and later recover power connection and detect the length of table during the data transmission to reduce the power consumption. S2610 adopts new technology of RTCT, UDLD, Attack Prevention, limit MAC address and so forth. It obeys the rules of Restriction of Hazardous Substances and Waste Electrical and Electronic Equipment., and it also plays a positive role in promoting the energy-saving products.

• 8 * 10/100Base-T, support POE
• 2 * Combo GE
• 2 * 100M/1000M SFP
• 8K MAC address
• 802.3af and 802.3at standard of POE, with 150W maximum power output
• Dual AC220V
• Forwarding Capacity – 7.14Mpps
• Backplane – 9.6Gbps

S2610 POE switch is developed by GCOM as a new generation carrier access Ethernet POE devices, helping enterprises to build superior IT network. S2610 POE switch not only satisfies IEEE standard of 802.3af and 802.3at, but also be compatible with the powered devices which do not meet the IEEE standard of 802.3af and 802.3at. The maximum power consumption of each port is 30W and the whole power consumption reaches 400W.

• 8*10/100 Base-T портов
• 2*GE Combo + 2*100M/1000M SFP портов
• 8K MAC address
• Forwarding Capacity – 7.14Mpps
• Backplane – 9.6Gbps
• Power – ≤12W
• Dual AC220V

S2610 adopts IEEE 802.3az standard, providing low-cost application for Ethernet Base-T receiver (100Mb, 1GbE and 10GbE) and low-power idle application for backplane physical layer. When the device in the period of low utilization or idle, it will disconnect the power connection firstly, and later recover power connection and detect the length of table during the data transmission to reduce the power consumption. S2610 adopts new technology of RTCT, UDLD, Attack Prevention, limit MAC address and so forth. It obeys the rules of Restriction of Hazardous Substances and Waste Electrical and Electronic Equipment., and it also plays a positive role in promoting the energy-saving products.

• 16*10/100 Base-T портов
• 4*GE Combo порта
• 16K MAC address
• Forwarding Capacity – 5.36Mpps
• Backplane – 7.2Gbps
• Power – ≤12W
• AC220V and DC power

S2610 adopts IEEE 802.3az standard, providing low-cost application for Ethernet Base-T receiver (100Mb, 1GbE and 10GbE) and low-power idle application for backplane physical layer. When the device in the period of low utilization or idle, it will disconnect the power connection firstly, and later recover power connection and detect the length of table during the data transmission to reduce the power consumption. S2610 adopts new technology of RTCT, UDLD, Attack Prevention, limit MAC address and so forth. It obeys the rules of Restriction of Hazardous Substances and Waste Electrical and Electronic Equipment., and it also plays a positive role in promoting the energy-saving products.

• FE Port – 5*10/100 Base-T
• Forwarding Capacity – 0.74Mpps
• Backplane – 1Gbps
• Power Consumption – ≤4W

• 24 * 10/100Base-T, support POE
• 2 * ComboGE
• 16K MAC address
• 802.3af and 802.3at standard of POE, with 400W maximum power output
• AC220V
• Forwarding Capacity – 6.55Mpps
• Backplane – 8.8Gbps

S2610 POE switch is developed by GCOM as a new generation carrier access Ethernet POE devices, helping enterprises to build superior IT network. S2610 POE switch not only satisfies IEEE standard of 802.3af and 802.3at, but also be compatible with the powered devices which do not meet the IEEE standard of 802.3af and 802.3at. The maximum power consumption of each port is 30W and the whole power consumption reaches 400W.

• 24*10/100 Base-T
• 2*GE Combo
• 16K MAC address
• Forwarding Capacity – 6.55Mpps
• Backplane – 8.8Gbps
• Power 12W
• Power type AC / DC

S2610-26TC is a high-density port access switch and L2 feature set.
The GCOM S2610-26TC switch has 24 ports of 10 / 100Base-T and 2 * GE Combo ports onboard (support 100 / 1000BaseX SFP or 100 / 1000BaseT). It supports the necessary set of functions for the organization of quality service, as well as the function of cable diagnostics, DDM and protection against static.

COMPLETE POWER SUPPLY UNIT (AC or DC) SPECIFY AT MANAGERS

• 24*10/100 Base-T ports
• 4*GE Combo ports
• 8K MAC address
• Forwarding Capacity – 9.52Mpps
• Backplane – 12.8Gbps
• Power – ≤16W
• AC220V and DC

S2610 adopts IEEE 802.3az standard, providing low-cost application for Ethernet Base-T receiver (100Mb, 1GbE and 10GbE) and low-power idle application for backplane physical layer. When the device in the period of low utilization or idle, it will disconnect the power connection firstly, and later recover power connection and detect the length of table during the data transmission to reduce the power consumption. S2610 adopts new technology of RTCT, UDLD, Attack Prevention, limit MAC address and so forth. It obeys the rules of Restriction of Hazardous Substances and Waste Electrical and Electronic Equipment., and it also plays a positive role in promoting the energy-saving products.

• 20*10/100/1000Base-T with POE power supply
• 4*ComboGE((100/1000M BaseX SFP or 100/1000M BaseT)
• 16K Jumbo, 8K MAC address, 4K VLAN, QinQ
• 256ACL with IP+MAC+Port+VLAN binding
• Full-loaded power-consumption< 30W (without POE supply）
• POE supply satisfy 802.3af and 802.3at
• Max power consumption supply of single port is 32W
• Maximum POE power consumption is 400W

S5100 Series all GE POE switches is a new generation of intelligent carrier-grade GE switches. They are applied into 802.11n platform. As a leading high-performing POE switches, S5100 series switches provide large capacity, high-density GE ports to fully meet customer’s demand with cost-effective GE
access/aggregation. For enterprise network users and carrier about WLAN,WIFI,FTTH, security monitoring and many other scenarios, S5100 POE switches provide convenient maintenance methods to reduce network planning, construction and maintenance pressure in order to build future-oriented enterprise IT network. S5100 POE switches satisfy IEEE standard of 802.3af and 802.3at. The maximum power consumption of each port is 32W, the whole power consumption can reach 400W.

•  8 * 10/100/1000BaseT, support POE
• 2* 100M/ 1000M SFP
• 18K MAC address
• Forwarding Capacity – 14.9Mpps
• Backplane – 20Gbps
• meet 802.3af standard and 802.3atstandard
• the maximum power supply of single port is 30W
• POE power supply is 150W for the maximum

S5110 POE switch is developed by GCOM as a new generation carrier access Ethernet POE devices, meeting customers’ demand on cost-effective gigabit access. Targeting various application scenarios (such as WLAN, WIFI, FTTH, security and protection monitoring), S5110 POE adopts simple and convenient installation and maintenance so as to help customers to ease the pressure on network planning, construction and maintenance. This series not only satisfy IEEE standard of 802.3af and 802.3at, but also are compatible with the powered devices which do not meet the IEEE standard of 802.3af and 802.3at. The maximum power consumption of each port is 32W and the whole power consumption can reach 400W.

• 8 * 100/1000BaseT
• 2 * ComboGE
• 8K MAC address
• AC220
• Forwarding Capacity – 14.9Mpps
• Backplane – 20Gbps
• Power 8W

S5110 is L2 full-Gigabit switch, covering all kinds of enterprise customers. S5110 provides 10/12/28*10/100/1000Base-T or 1000Base-X SFP for the demand of cost-effective Gigabit access / aggregation. It adopts high performance processor to provide full speed forwarding and line-dormant capacity to offer customs multitudinous service features. Moreover, S5110 supports multiple configuration modes (such as SNMP, Telnet, Web, Console, etc) to make it easy for network management and maintenance. Last but not least, S5110 offers the most flexible port combination form to facilitate user operations.

• 8 * 10/100/1000BaseT, support POE
• 4 * 100M/ 1000M SFP
• 8K MAC address
• Forwarding Capacity – 17.9Mpps
• Backplane – 24Gbps
• meet 802.3af standard and 802.3atstandard
• the maximum power supply of single port is 30W
• POE power supply is 150W for the maximum

S5110 POE switch is developed by GCOM as a new generation carrier access Ethernet POE devices, meeting customers’ demand on cost-effective gigabit access. Targeting various application scenarios (such as WLAN, WIFI, FTTH, security and protection monitoring), S5110 POE adopts simple and convenient installation and maintenance so as to help customers to ease the pressure on network planning, construction and maintenance. This series not only satisfy IEEE standard of 802.3af and 802.3at, but also are compatible with the powered devices which do not meet the IEEE standard of 802.3af and 802.3at. The maximum power consumption of each port is 32W and the whole power consumption can reach 400W.

• 8 * 100/1000BaseT
• 4 * GE SFP
• 8K MAC address
• AC220 dual power supply interface
• Forwarding Capacity – 17.9Mpps
• Backplane – 24Gbps
• Power < 10W

S5110 is L2 full-Gigabit switch, covering all kinds of enterprise customers. S5110 provides 10/12/28*10/100/1000Base-T or 1000Base-X SFP for the demand of cost-effective Gigabit access / aggregation. It adopts high performance processor to provide full speed forwarding and line-dormant capacity to offer customs multitudinous service features. Moreover, S5110 supports multiple configuration modes (such as SNMP, Telnet, Web, Console, etc) to make it easy for network management and maintenance. Last but not least, S5110 offers the most flexible port combination form to facilitate user operations.

•  24 * 10/100/1000BaseT, support POE
• 4 * 100M/ 1000M SFP
• 8K MAC address
• Forwarding Capacity – 41.7Mpps
• Backplane – 56Gbps
• meet 802.3af standard and 802.3atstandard
• the maximum power supply of single port is 32W
• POE power supply is 400W for the maximum

S5110 POE switch is developed by GCOM as a new generation carrier access Ethernet POE devices, meeting customers’ demand on cost-effective gigabit access. Targeting various application scenarios (such as WLAN, WIFI, FTTH, security and protection monitoring), S5110 POE adopts simple and convenient installation and maintenance so as to help customers to ease the pressure on network planning, construction and maintenance. This series not only satisfy IEEE standard of 802.3af and 802.3at, but also are compatible with the powered devices which do not meet the IEEE standard of 802.3af and 802.3at. The maximum power consumption of each port is 32W and the whole power consumption can reach 400W.

• 24 * 100/1000BaseT
• 4 * ComboGE
• 8K MAC address
• AC: 220V
• Forwarding Capacity – 41,7Mpps
• Backplane – 56Gbps
• Power < 20W

The S5110-28TC is a high-density port access switch and L2 feature set.
The GCOM S5110-28TC switch has onboard 24 * 100 / 1000Base-T and 4 * GE Combo ports (support 100 / 1000BaseX SFP or 100 / 1000BaseT). It supports the necessary set of functions for the organization of quality service, as well as the function of cable diagnostics, DDM and protection against static.

Short description of Switch L2+ GCOM S5330-28SX

• GE Port – 20*100/1000Base-X
• Expansion Port – 4*GE Combo, 4*10GE SFP+
• Forwarding Capacity – 95Mpps
• Backplane – 128Gbps
• Power Consumption – ≤60W
• 16K MAC address
• AC 220V

The S5330-28SX is a switch with a high port density and feature set L2 + level.
The GCOM S5330-28SX switchboard has onboard 20 * 100 / 1000Base-X, as well as 4 * 10GE SFP + and 4 * GE Combo (support 100 / 1000BaseX SFP or 100 / 1000BaseT) ports for organizing uplinks. It supports the necessary set of functions for the organization of quality service, as well as the function of cable diagnostics, DDM and protection against static. GCOM S5330-28SX uses a high-performance processor to provide maximum transfer speed and create lines for the NGBN (New Generation Backbone Network), has extensive ACL capabilities, IP + MAC + port bindings and much more.

• 24*10/100/1000Base-T порта
• 4*10GE SFP+ порта
• 16K MAC address
• Скорость пересылки – 95.2Mpps
• Коммутационная матрица – 128Gbps
• Максимальное энергопотребление до 40W
• Питание AC 220V

S5330-28TX является коммутатором с высокой плотностью портов и набором функций уровня L2+.
Коммутатор GCOM S5330-28TX имеет на борту 24*10/100/1000Base-T и 4*10GE SFP+ порта для организации аплинков.
Поддерживает необходимый набор функций для организации качественного сервиса, а так же функцию диагностики кабеля, DDM и защиту от статики. GCOM S5330 использует высокопроизводительный процессор для обеспечения максимальной скорости пересылки и создания линий для NGBN (New Generation Backbone Network), имеет широкие возможности ACL, привязки IP + MAC + port и многое другое.

• GE Port – 48*10/100/1000Base-T
• Expansion Port – 4*10GE SFP+
• Forwarding Capacity – 130Mpps
• Backplane – 176Gbps
• Power Consumption – ≤60W
• 16K MAC address
• AC 220V

The S5330-52TX is a switch with a high port density and feature set L2 + level.
The GCOM S5330-52TX switchboard has 48 * 10/100 / 1000Base-T and 4 * 10GE SFP + ports for uplink organization.
It supports the necessary set of functions for the organization of quality service, as well as the function of cable diagnostics, DDM and protection against static. GCOM S5330 uses a high-performance processor to provide maximum transfer speed and create lines for the NGBN (New Generation Backbone Network), has extensive ACL capabilities, IP + MAC + port bindings and much more.

• 20*10/100/1000 Base-X
• 4*GE Combo, 4*10GE SFP+
• 16K MAC address
• Скорость пересылки – 95Mpps
• Коммутационная матрица – 128Gbps
• Максимальное энергопотребление до 60W
• Питание AC

Коммутатор GCOM S5350 – это коммутатор уровня L2+, предназначен для организации гигабитного доступа операторского класса. Имеет на борту 24 порта 10/100/1000Base-X, 4 гигабитных комбо порта и 4 порта 10GE (SFP+) для организации аплинков. GCOM S5350 использует высокопроизводительный процессор для обеспечения максимальной скорости пересылки и создания линий для NGBN (New Generation Backbone Network), имеет широкие возможности ACL, привязки IP + MAC + port протоколы маршрутизации и многое другое.

КОМПЛЕКТАЦИЮ БЛОКОВ ПИТАНИЯ (AC/DC) УТОЧНЯЙТЕ У МЕНЕДЖЕРОВ.

• GE Port – 24*10/100/1000Base-T
• Expansion Port – 4*10GE SFP+
• Forwarding Capacity – 95Mpps
• Backplane – 128Gbps
• Power Consumption – ≤40W
• 16K MAC address
• AC: 110～240V, 47～67Hz

S5350 is designed for carrier-class GE access and 10G uplink networks. It covers all kinds of enterprise/ operators customer, having the capacity to meet the demand of cost-effective Gigabit access / aggregation. S5350 adopts high performance processor to provide full speed forwarding and line-dormant capacity to coordinate with NGBN. It supplies abundant and flexible service features, ensuring operability, manageability, and expansibility.

• Backplane capacity 128Gbps
• Throughput 95.2Mpps
• 24*GE Combo
• 2*10GE slot
• 1+1 redundant power
• Support stack
• Full-loaded power ≤50W

S5650 Series is 10GE security routing Ethernet switch with high-performance, high-security and multi-service. It owns advanced non-blocking array exchange and huge packet cache supporting smooth operation at the extreme circumstance. It is for IP MAN convergence layer and large-scale enterprise zone or the core of the network layer.

Данная модель включена в Подменный фонд

• 12*10/100/1000 Base-X SFP портов
• 12*GE Combo портов
• 2*10GE slot
• 16K MAC address
• Скорость пересылки – 95.2Mpps
• Коммутационная матрица – 128Gbps
• Максимальное энергопотребление до 50W
• Питание AC или DC
• Резервирование по питанию 1+1

S5650-28SM является коммутатором с высокой плотностью портов и всем необходимым набором функций уровня L3.
Коммутатор GCOM S5650-28SM имеет на борту 12*10/100/1000Base-X, 12*GE Combo( поддержка 100/1000BaseX SFP или 100/1000BaseT) портов для организации аплинков, а также поддерживает 2*10GE слота.
Поддерживает стекирование и весь необходимый набор функций для организации качественного сервиса, а так же функцию диагностики кабеля, DDM и защиту от статики. GCOM S5650-28SM использует высокопроизводительный процессор для обеспечения максимальной скорости пересылки и создания линий для NGBN (New Generation Backbone Network), имеет широкие возможности ACL, привязки IP + MAC + port и многое другое.

КОМПЛЕКТАЦИЮ БЛОКОВ ПИТАНИЯ (AC/DC) УТОЧНЯЙТЕ У МЕНЕДЖЕРОВ.

• Backplane capacity 128Gbps
• Throughput 95.2Mpps
• 12*10/100/1000Base-T
• 12*GE Combo
• 2*10GE slot
•  1+1 redundant power
•  Support stack
• Full-loaded power ≤40W

The S5650-28TM is a switch with a high port density and all necessary L3-level feature set.
The GCOM S5650-28TM switchboard has 12 * 10/100 / 1000Base-T, 12 * GE Combo (support 100 / 1000BaseX SFP or 100 / 1000BaseT) ports for uplink organization, and also supports 2 * 10GE slots.  It supports stacking and all the necessary functions for organizing quality service, as well as cable diagnostics, DDM, and static protection. GCOM S5650-28TM uses a high-performance processor to provide maximum transfer speed and create lines for the NGBN (New Generation Backbone Network), has extensive ACL capabilities, IP + MAC + port bindings and much more.

• 44*10/100/1000 Base-X SFP
• 4*GE Combo
• 2 слота расширения 10GE XFP slot
• Forwarding Capacity – 130.9Mpps
• Backplane – 256Gbps
• Энергопотребление – ≤70W
• 1+1 резервирование по питанию
• Поддержка стекирования

Коммутаторы GCOM S5650 – серия GCOM S5650 – включает гигабитные коммутаторы с функцией маршрутизации, высокой производительностью, степенью защиты и мультисервисом. Устройства способны обеспечить стабильную работу при экстремальных условиях. Коммутатор GCOM S5650-52SM предназначен для уровня агрегации IP MAN, крупной корпоративной зоны или ядра сетевого уровня. Имеет на борту 44*GE порта 100/1000Base-X SFP и 4 комбо порта Rj-45/SFP. На задней панели имеются два слота для установки плат расширения с портами XFP для организации аплинков.

КОМПЛЕКТАЦИЮ БЛОКОВ ПИТАНИЯ (AC/DC) УТОЧНЯЙТЕ У МЕНЕДЖЕРОВ.

• Backplane capacity 256Gbps
• Packet forwarding rate 130.9Mpps
• 44*10/100/1000Base-T
• 4*GE Combo
• 2*10GE XFP slot
• Support stack
• Full-loaded power ≤60W

S5650 Series is 10GE security routing Ethernet switch with high-performance, high-security and multi-service. It owns advanced non-blocking array exchange and huge packet cache supporting smooth operation at the extreme circumstance. It is for IP MAN convergence layer and large-scale enterprise zone or the core of the network layer.

Данная модель включена в Подменный Фонд

• 16*10GE SFP+
• Скорость пересылки – 238Mpps
• Коммутационная емкость – 320Gbps
• Энергопотребление до 40W
• 16K MAC address
• Резервирование по питанию 1+1
• Тип питания – AC/DC
• 2 блока вентиляторов с поддержкой горячей замены

S6100-16X является коммутатором с высокой плотностью портов и всем необходимым набором функций уровня L2+.  Коммутатор GCOM S6100-16X имеет на борту 16*10GE SFP портов для организации аплинков.
Поддерживает 2 вентиляторы (с возможность горячей замены), и весь необходимый набор функций для организации качественного сервиса, а так же функцию диагностики кабеля, DDM и защиту от статики. GCOM S6100-16X использует высокопроизводительный процессор для обеспечения максимальной скорости пересылки и создания линий для NGBN (New Generation Backbone Network), имеет широкие возможности ACL, привязки IP + MAC + port и многое другое.

• 12*10GE SFP+, 4*1GE SFP
• 4*100/1000Base-T
• Скорость пересылки – 256Mpps
• Коммутационная емкость – 256Gbps
• Энергопотребление до 40W
  16K MAC address
• Резервирование по питанию 1+1
• Тип питания – AC
• 2 блока вентиляторов с поддержкой горячей замены

Серия коммутаторов GCOM S6100 являются коммутаторами уровня L2+ и применяются для агрегации серверов в центрах обработки данных. GCOM S6100 использует высокопроизводительный процессор для обеспечения высокой скорости коммутации. Поддержка двойного стека протоколов IPv4 и IPv6, протоколов маршрутизации, расширенных ACL и пр. Коммутатор GCOM S6100-20TX имеет на борту 12 десятигигабитных портов SFP+, 4 порта SFP и 4 порта 10/100/1000Base-T.

• 24*10GE SFP+
• Скорость пересылки – 360Mpps
• Емкость коммутации – 480Gbps
• Энергопотребление до 120W
• Блок вентиляторов с горячей заменой
• Резервирование по питанию 1+1
• Поддержка стекирования

S6300-24X является коммутатором с высокой плотностью портов и всем необходимым набором функций уровня L3.
Коммутатор GCOM S6300-24X имеет на борту 24*10GE SFP+ портов для организации аплинков.
Поддерживает стекирование и 3 вентиляторы (с возможность горячей замены), и весь необходимый набор функций для организации качественного сервиса, а так же функцию диагностики кабеля, DDM и защиту от статики. GCOM S6300-24X использует высокопроизводительный процессор для обеспечения максимальной скорости пересылки и создания линий для NGBN (New Generation Backbone Network), имеет широкие возможности ACL, привязки IP + MAC + port и многое другое.

КОМПЛЕКТАЦИЮ БЛОКОВ ПИТАНИЯ (AC/DC) УТОЧНЯЙТЕ У МЕНЕДЖЕРОВ.

Данная модель включена в Подменный Фонд

• 24*10GE SFP+
• 2*40GE QSFP
• Forwarding Capacity – 480Mpps
• Backplane – 640Gbps
• Энергопотребление – ≤130W
• Блок вентиляторов с возможностью горячей замены
• 1+1 резервирование по питанию
• Поддержка стекирования

S6300-26XQ является коммутатором с высокой плотностью портов и всем необходимым набором функций уровня L3.  Коммутатор GCOM S6300-26XQ имеет на борту 24*10GE SFP+ и 2*40GE QSFP портов для организации аплинков. Поддерживает стекирование и 3 вентиляторы (с возможность горячей замены), и весь необходимый набор функций для организации качественного сервиса, а так же функцию диагностики кабеля, DDM и защиту от статики. GCOM S6300-26XQ использует высокопроизводительный процессор для обеспечения максимальной скорости пересылки и создания линий для NGBN (New Generation Backbone Network), имеет широкие возможности ACL, привязки IP + MAC + port и многое другое.

КОМПЛЕКТАЦИЮ БЛОКОВ ПИТАНИЯ (AC/DC) УТОЧНЯЙТЕ У МЕНЕДЖЕРОВ.

• 48*10GE SFP+, 6*40GE QSFP
• Скорость пересылки – 1095Mpps
• Коммутационная емкость – 1.28Tbps
• Энергопотребление до 180W
• Резервирование по питанию 1+1
• Поддержка стекирования, MPLS VPN, VxLAN
• 2 блока вентиляторов с возможностью горячей замены.

Коммутаторы GCOM S6300 – это 10 гигабитные коммутаторы уровня L3 с высокой производительностью, степенью защиты и мультисервисом. Серия GCOM S6300 имеет усовершенствованную аппаратную конструкцию резервирования питания с горячей заменой. Устройства могут поддерживать до 48 портов 10GE и 6 портов 40G. Данные коммутаторы предназначены для уровня конвергенции IP MAN и крупной корпоративной зоны или ядра сетевого уровня. Коммутатор GCOM S6300-52XQ имеет 48 десятигигабитных SFP+ порта, 6 портов QSFP на 40 Gbps и поддержку стекирования.

КОМПЛЕКТАЦИЮ БЛОКОВ ПИТАНИЯ (AC/DC) УТОЧНЯЙТЕ У МЕНЕДЖЕРОВ.