Switch L2 GCOM S2008B+

• Backplane capacity 128Gbps
• Throughput 95.2Mpps
• 12*10/100/1000Base-T
• 12*GE Combo
• 2*10GE slot
•  1+1 redundant power
•  Support stack
• Full-loaded power ≤40W

The S5650-28TM is a switch with a high port density and all necessary L3-level feature set.
The GCOM S5650-28TM switchboard has 12 * 10/100 / 1000Base-T, 12 * GE Combo (support 100 / 1000BaseX SFP or 100 / 1000BaseT) ports for uplink organization, and also supports 2 * 10GE slots.  It supports stacking and all the necessary functions for organizing quality service, as well as cable diagnostics, DDM, and static protection. GCOM S5650-28TM uses a high-performance processor to provide maximum transfer speed and create lines for the NGBN (New Generation Backbone Network), has extensive ACL capabilities, IP + MAC + port bindings and much more.

• 8*10/100 Base-T портов
• 2*GE Combo + 2*100M/1000M SFP портов
• 8K MAC address
• Forwarding Capacity – 7.14Mpps
• Backplane – 9.6Gbps
• Power – ≤12W
• Dual AC220V

S2610 adopts IEEE 802.3az standard, providing low-cost application for Ethernet Base-T receiver (100Mb, 1GbE and 10GbE) and low-power idle application for backplane physical layer. When the device in the period of low utilization or idle, it will disconnect the power connection firstly, and later recover power connection and detect the length of table during the data transmission to reduce the power consumption. S2610 adopts new technology of RTCT, UDLD, Attack Prevention, limit MAC address and so forth. It obeys the rules of Restriction of Hazardous Substances and Waste Electrical and Electronic Equipment., and it also plays a positive role in promoting the energy-saving products.

• 44*10/100/1000 Base-X SFP
• 4*GE Combo
• 2 слота расширения 10GE XFP slot
• Forwarding Capacity – 130.9Mpps
• Backplane – 256Gbps
• Энергопотребление – ≤70W
• 1+1 резервирование по питанию
• Поддержка стекирования

Коммутаторы GCOM S5650 – серия GCOM S5650 – включает гигабитные коммутаторы с функцией маршрутизации, высокой производительностью, степенью защиты и мультисервисом. Устройства способны обеспечить стабильную работу при экстремальных условиях. Коммутатор GCOM S5650-52SM предназначен для уровня агрегации IP MAN, крупной корпоративной зоны или ядра сетевого уровня. Имеет на борту 44*GE порта 100/1000Base-X SFP и 4 комбо порта Rj-45/SFP. На задней панели имеются два слота для установки плат расширения с портами XFP для организации аплинков.

КОМПЛЕКТАЦИЮ БЛОКОВ ПИТАНИЯ (AC/DC) УТОЧНЯЙТЕ У МЕНЕДЖЕРОВ.

• FE Port – 8*10/100 Base-T
• Forwarding Capacity – 1.19Mpps
• 4K MAC , 16 *802.1QVLAN
• Backplane – 8.8Gbps
• Power Consumption – ≤7W
• Remote WEB management
• Modify device configuration by NMS to upgrade by batch
• 1port provide -48V DC to upward port

S2008B-P series are client-powered reverse feeding switches based on S2000B series published , they aim to corridor device due to class-carrier network is difficult to take power,they can satisfy green energy access requirements with client usages by special client power supply module which is share power from more users. S2008B-P series provide L2 forwarding speed, the first port supports DC -48V to upward port, other ports are received power from clients.The powered ports configure to shut down automatically if not getting power.These series support 802.1Q VLAN and port VLAN,port bidirectional
bandwidth control and mirroring, all ports endure over 4KV lightning , power has over 2KV surge protection to fulfill with L2 security access requirements in the class-carrier network which taking power from clients.

• GE Port – 24*10/100/1000Base-T
• Expansion Port – 4*10GE SFP+
• Forwarding Capacity – 95Mpps
• Backplane – 128Gbps
• Power Consumption – ≤40W
• 16K MAC address
• AC: 110～240V, 47～67Hz

S5350 is designed for carrier-class GE access and 10G uplink networks. It covers all kinds of enterprise/ operators customer, having the capacity to meet the demand of cost-effective Gigabit access / aggregation. S5350 adopts high performance processor to provide full speed forwarding and line-dormant capacity to coordinate with NGBN. It supplies abundant and flexible service features, ensuring operability, manageability, and expansibility.

• FE Port – 8*10/100 Base-T
• Expansion Port – 2* GE Combo
• 8K MAC address
• Forwarding Capacity – 4.17Mpps
• Backplane – 5.6Gbps
• Power Consumption – ≤8W
• AC220V

S2610 adopts IEEE 802.3az standard, providing low-cost application for Ethernet Base-T receiver (100Mb, 1GbE and 10GbE) and low-power idle application for backplane physical layer. When the device in the period of low utilization or idle, it will disconnect the power connection firstly, and later recover power connection and detect the length of table during the data transmission to reduce the power consumption. S2610 adopts new technology of RTCT, UDLD, Attack Prevention, limit MAC address and so forth. It obeys the rules of Restriction of Hazardous Substances and Waste Electrical and Electronic Equipment., and it also plays a positive role in promoting the energy-saving products.