Categories: ,

Switch L2 GCOM S2600-52TS

  • 48*10/100 Base-T
  • 4*GE SFP
  • 16K MAC address
  • Forwarding Capacity – 13.1Mpps
  • Backplane – 72Gbps
  • Power – 45W
  • AC220 and DC48V

S2600 is developed by GCOM to carry multiple Ethernet services, applying to various Ethernet access scenarios. Based on high-performance hardware of a new generation and the intelligent CPU, S2600 provides abundant and flexible service features, ensuring operability, manageability, and expansibility. Moreover, S2600 also supports strong ACL functions, port QinQ, flexible QinQ, 1:1 and N: 1 VLAN switch to flexibly deploy VLANs.

Share it:

Main Features

Backplane capacity 72Gbps
Interface switching capacity 17.6Gbps
Forwarding capacity 13.1Mpps
Power consumption ≤45W
Dimensions (width x depth x height)) 440mmx220mmx44mm
Weight (Full-loaded) ≤3.5kg
Power supply AC: 100~240V, 50~60Hz        DC: -36V~-72V
Environmental requirements Working temperature: -25°C~50°C
Storage temperature: -40°C~70°C
Relative humidity: 10%~90%, non-condensing

Detailed Features

L2 features MAC 16K MAC address
IP + MAC + port binding
ARP anti-attack
Aging time and add/remove static MAC
MAC Black Hole
Port MAC Limit
Disable MAC address learning on port or channel-group
VLAN 4K VLAN entries.
Port-based and MAC-based VLAN
Port-isolation in a VLAN
Port QinQ and selective QinQ
1:1 and N:1 VLAN switching
Port Bidirectional bandwidth control, configure entry/exit
Storm-control on port, configure broadcast/multicast/unknown unicast
Static and LACP, configure 14/30 groups and 8 members port each group
Port- mirroring of 1:1 or N:1
Security features User’s security ARP anti-Flooding, configure ARP traffic safety threshold and inhibition ARP packet
ARP anti-Spoofing , configure ARP inner and outer MAC check and static ARP checklist and drop / flood action
IP Source Guard, auto-create
IP+MAC+port+VLAN binding table
IEEE 802.1x and AAA/Radius authentication
IP+MAC+port+VLAN binding manually
Port Isolation
Bind MAC address to port and MAC address filtration on port
Network security User-based ARP abnormal traffic filtration
Auto-shutdown port in storm
Update user’s location through DHCP Option82 and PPPoE+
Port-based broadcast/multicast/unknown unicast suppression
L2-L4 ACL flow filtration
Device security Anti-DOS attack
SSHv2 Secure Shell
SNMP v3 encryption
Telnet based on Security IP
Prevent unauthorized user
Service features ACL Activate 1K/460 standard and extended ACL at the same time
Port/VLAN/global-based ACL and Time Range-based ACL strategy
CAR and ACL in the dynamic AAA
QoS 4 /8 queues with different priorities on each interface, configure the algorithms of SP, WRR, and SP+WRR
Flow classification based on SMAC,DMAC,VLAN,SIP,DIP,IP protocol, port number and CoS
Traffic priority definition and packet re-direction
Multicast 1K L2 multicast groups
IGMPv1/v2/v3 Snooping
IGMP Filter/Fast leave/cross-VLAN duplication
MLDv2/MLDv2 Snooping
Reliability Loop protection EAPS and ERRP
Link protection FlexLink (recover-time <50ms)
RSTP/MSTP (recover-time <1s)
LACP (recover-time <10ms)
Device protection Dual fault tolerance backup of host application and configuration file
provide 12V RPS redundant power supply interface, accept customization
Support to be configured with user-specified configuration
Strictly follow the relevant standards, and other mainstream manufacturers fully interoperability
Maintenance Network maintenance Port real-time, utilization and transmit/receive statistic based on CLI
802.3ah Ethernet OAM
Syslog and RFC 3164 BSD syslog Protocol
Ping and Traceroute
Device management CLI, Console port, Telnet and WEB management
RMON (Remote Monitoring)1,2,3,9 MIB
GN.LinkⅡ Server
NGBNView network management

L2 GCOM S2600-52TS firmware



GCOM S2600-52TS datasheet



Switch Configuration Guide


Configuration Guide

Software manual_Part 1


Software manual

Software manual_Part 2


Software manual