Switch L2 GCOM S5100-28PC

• FE Port – 8*10/100 Base-T
• Expansion Port – 2* GE Combo
• 8K MAC address
• Forwarding Capacity – 4.17Mpps
• Backplane – 5.6Gbps
• Power Consumption – ≤8W
• AC220V

S2610 adopts IEEE 802.3az standard, providing low-cost application for Ethernet Base-T receiver (100Mb, 1GbE and 10GbE) and low-power idle application for backplane physical layer. When the device in the period of low utilization or idle, it will disconnect the power connection firstly, and later recover power connection and detect the length of table during the data transmission to reduce the power consumption. S2610 adopts new technology of RTCT, UDLD, Attack Prevention, limit MAC address and so forth. It obeys the rules of Restriction of Hazardous Substances and Waste Electrical and Electronic Equipment., and it also plays a positive role in promoting the energy-saving products.

•  8 * 10/100/1000BaseT, support POE
• 2* 100M/ 1000M SFP
• 18K MAC address
• Forwarding Capacity – 14.9Mpps
• Backplane – 20Gbps
• meet 802.3af standard and 802.3atstandard
• the maximum power supply of single port is 30W
• POE power supply is 150W for the maximum

S5110 POE switch is developed by GCOM as a new generation carrier access Ethernet POE devices, meeting customers’ demand on cost-effective gigabit access. Targeting various application scenarios (such as WLAN, WIFI, FTTH, security and protection monitoring), S5110 POE adopts simple and convenient installation and maintenance so as to help customers to ease the pressure on network planning, construction and maintenance. This series not only satisfy IEEE standard of 802.3af and 802.3at, but also are compatible with the powered devices which do not meet the IEEE standard of 802.3af and 802.3at. The maximum power consumption of each port is 32W and the whole power consumption can reach 400W.

• 8*10/100Base-T with POE power supply
• 1/2*ComboGE+ (100/1000M BaseX SFP or 100/1000M BaseT)
• 10K Jumbo, 16K MAC address, 4K VLAN, QinQ
• 460 ACL with controlling depth of L4
• Full-loaded power-consumption is lower than 14W（without POE supply)
• POE supply satisfy 802.3af and 802.3at
• Max power consumption supply of single port is 40 W
• Forwarding Capacity – 4.2Mpps
• Backplane- 20Gbps

S2600 POE series Ethernet switches are developed by GCOM as a new generation carrier access Ethernet POE devices. These series not only provide high bandwidth transmitting , but also provide remote power supply based on IP terminal devices S2600 POE switches satisfy IEEE standard of 802.3af and 802.3at. The maximum power consumption of each port is 32W, the whole power consumption can reach 400W.

• 24*10/100Base-T
• 4 * GE Combo Port
• 16K MAC address
• Forwarding Capacity – 9.6Mpps
• Backplane – 40Gbps
• Power – 28W
• AC220 and DC48V

The S2600-28TC is a high-density port access switch and L2 feature set.
The GCOM S2600-28TC switch has 24 ports of 10 / 100Base-T, 4 * GE Combo ports (support 100 / 1000BaseX SFP or 100 / 1000BaseT). It supports the necessary set of functions for the organization of quality service, as well as the function of cable diagnostics, DDM and protection against static.

• FE Port – 16*10/100 Base-T
• Forwarding Capacity – 2.38Mpps
• 4K MAC , 16 *802.1QVLAN
• Backplane – 8.8Gbps
• Power Consumption – ≤10W
• Remote WEB management
• Modify device configuration by NMS to upgrade by batch
• 1port provide -48V DC to upward port

S2008B-P series are client-powered reverse feeding switches based on S2000B series published, they aim to corridor device due to class-carrier network is difficult to take power,they can satisfy green energy access requirements with client usages by special client power supply module which is share power from more users. S2008B-P series provide L2 forwarding speed, the first port supports DC -48V to upward port, other ports are received power from clients.The powered ports configure to shut down automatically if not getting power. These series support 802.1Q VLAN and port VLAN,port bidirectional
bandwidth control and mirroring, all ports endure over 4KV lightning , power has over 2KV surge protection to fulfill with L2 security access requirements in the class-carrier network which taking power from clients.

• 8 * 10/100Base-T, support POE
• 2 * Combo GE
• 2 * 100M/1000M SFP
• 8K MAC address
• 802.3af and 802.3at standard of POE, with 150W maximum power output
• Dual AC220V
• Forwarding Capacity – 7.14Mpps
• Backplane – 9.6Gbps

S2610 POE switch is developed by GCOM as a new generation carrier access Ethernet POE devices, helping enterprises to build superior IT network. S2610 POE switch not only satisfies IEEE standard of 802.3af and 802.3at, but also be compatible with the powered devices which do not meet the IEEE standard of 802.3af and 802.3at. The maximum power consumption of each port is 30W and the whole power consumption reaches 400W.