Switch L3 GCOM S5650-52TM


  • Backplane capacity 256Gbps
  • Packet forwarding rate 130.9Mpps
  • 44*10/100/1000Base-T
  • 4*GE Combo
  • 2*10GE XFP slot
  • Support stack
  • Full-loaded power ≤60W

S5650 Series is 10GE security routing Ethernet switch with high-performance, high-security and multi-service. It owns advanced non-blocking array exchange and huge packet cache supporting smooth operation at the extreme circumstance. It is for IP MAN convergence layer and large-scale enterprise zone or the core of the network layer.


Share it:

Main Features

Backplane capacity 256Gbps
Switching capacity 256Gbps
Packet forwarding  rate 130.9Mpps
Memory and storage 256MB DDR2 SDRAM Memory and 8MB Flash Memory
Redundancy design 1+1 hot-swap redundant power
Power supply AC:Input 90~260V,50~60Hz;
DC:Input -48V~-60V;
Power consumption Full-load ≤70W
Idle ≤30W
Outline dimensions 440mm×380mm×44mm
Weight (in maximum configuration) ≤6.5kg
Environmental Working temperature:0°C~60°C
Storage temperature:-40°C~70°C
Relative humidity:5%~95%,no condensing
Electromagnetic compatibility

Detailed Features

L2 features MAC 16K MAC address
MAC Black Hole
Port MAC Limit
VLAN 4K VLAN entries
Port-based/MAC-based/IP subnet-based VLAN
Port-based QinQ and Selective QinQ (StackVLAN)
VLAN Swap and VLAN Remark
PVLAN to realize port isolation and saving public-vlan resources
GVRP
Spanning tree protocol IEEE 802.1D Spanning Tree Protocol (STP)
IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
IEEE 802.1s Multiple Spanning Tree Protocol instances (MSTP)
Remote loop detecting
Port Bi-directional bandwidth control
Static link aggregation and LACP(Link Aggregation Control Protocol)
Port mirroring and traffic mirroring
Security features User’s security Anti-ARP-spoofing
Anti-ARP-flooding
IP Source Guard create IP+VLAN+MAC+Port binding
Port Isolation
MAC address binds to port and port MAC address filtration
IEEE 802.1x and AAA/Radius authentication
Device security Anti-DOS attack(such as ARP,Synflood, Smurf, ICMP attack), ARP detection, worm and Msblaster worm attack
SSHv2 Secure Shell
SNMP v3 encrypted management
Security IP login through Telnet
Hierarchical management and password protection of users
Network security User-based MAC and ARP traffic examination
automatic ARP protection based on MAC address and ARP packet suppression or automatic user block of ARP traffic detection
Dynamic ARP table-based binding
IP+VLAN+MAC+Port binding
L2 to L7 ACL flow filtration mechanism on the 80 bytes of the head of user-defined packet
Port-based broadcast/multicast suppression and auto-shutdown risk port
URPF to prevent IP address counterfeit and attack
DHCP Option82 and PPPoE+ upload user’s physical location
DHCP snooping / IP source Guard / 802.1X / rich security features
Link protection such as dynamic link aggregation and Ethernet ring network
Plaintext authentication of OSPF、RIPv2 and BGPv4 packets and MD5 cryptograph authentication
IP routing IPv4 ARP Proxy
DHCP Relay
DHCP Server
Static route
RIPv1/v2
OSPFv2
BGPv4
ECMP
Strategy route
Route policy
IPv6 ICMPv6
ICMPv6 redirection
DHCPv6
ACLv6
OSPFv3
RIPng
BGP4+
Configured Tunnel
ISATAP
6to4 tunnel
IPv6 and IPv4 Tunnels
IPv6 and IPv4 dual stack
PLS L3VPN、MPLS L2VPN and VPLS
Service features ACL Standard and extended ACL
Time Range ACL
Packet filter providing filtering based on source/destination MAC address, source/destination IP address, port, protocol, VLAN, VLAN range, MAC address range, or invalid frame. System supports concurrent identification at most 50 service traffic
Packet filtration of L2~L7 even deep to 80 bytes of IP packet head
QoS Rate-limit to packet sending/receiving speed of port or self-defined flow and provide general flow monitor and two-speed tri-color monitor of self-defined flow
Priority remark to port or self-defined flow and provide 802.1P, DSCP priority and Remark
transmission of high-priority packets with various traffic classification and QoS flow control functions
CAR(Committed Access Rate)、Traffic Shaping and flow statistics
Packet mirror and redirection of interface and self-defined flow
Super queue scheduler based on port and self-defined flow. Each port/ flow supports 8 priority queues and scheduler of SP, WRR and SP+WRR.
Congestion avoid mechanism,including Tail-Drop and WRED
Multicast IGMPv1/v2/v3
IGMPv1/v2/v3 Snooping
IGMP Filter
MVR and cross VLAN multicast copy
IGMP Fast leave
IGMP Proxy
PIM-SM/PIM-DM/PIM-SSM
PIM-SMv6、PIM-DMv6、PIM-SSMv6
MLDv2/MLDv2 Snooping
Reliability Loop protection EAPS and GERP (recover-time<50ms)
Loopback-detection
Link protection FlexLink (recover-time<50ms)
RSTP/MSTP (recover-time<1s)
LACP (recover-time<10ms)
BFD
Device protection VRRP host backup
Double fault-tolerant backup of host program and configuration files
1+1 power hot backup
Strictly follow the relevant standards, and other mainstream manufacturers fully interoperability
Maintenance Network maintenance Telnet-based statistics
RFC3176 sFlow
LLDP
802.3ah Ethernet OAM
RFC 3164 BSD syslog Protocol
Ping and Traceroute
Device management Command-line interface(CLI), Console, Telnet and WEB configuration
System configuration with SNMPv1/v2/v3
RMON (Remote Monitoring)1/2/3/9 groups of MIB
NTP(Network Time Protocol)
GN.LinkⅡ Server
NGBNView network management
WEB-based network management
Ping and Traceroute

L3 GCOM S5650-52TM firmware

Download

Firmware

GCOM S5650-52TM datasheet

Download

GCOM S5650-52TM datasheet

Switch Configuration Guide

Download

Switch Configuration Guide

Software manual_Part 1

Download

Software manual_Part 1

Software manual_Part 2

Download

Software manual_Part 2