Коммутатор управляемый L2 GCOM S5110-28TC


  • 24*10/100/1000Base-T портов
  • 4*GE Combo порта
  • 8K MAC адресов
  • Скорость пересылки — 41,7Mpps
  • Коммутационная матрица — 56Gbps
  • Энергопотребление до 20W
  • Питание AC220V

S5110-28TC является коммутатором уровня доступа с высокой плотностью портов и набором функций L2.
Коммутатор GCOM S5110-28TC имеет на борту 24*100/1000Base-T и 4*GE Combo порта ( поддержка 100/1000BaseX SFP или 100/1000BaseT). Поддерживает необходимый набор функций для организации качественного сервиса, а так же функцию диагностики кабеля, DDM и защиту от статики.

 


Share it:

Коммутатор управляемый L2 GCOM S5110-28TC

Основные характеристики

Switching Capacity 56Gbps
Forwarding Capacity 41.7Mpps
Memory and Storage 128M DDR and 16M FLASH
Power Supply AC: 90~260V, 50~60Hz;
Power Consumption ≤20W
Lightning Protection Port lightning protection 4KV
Dimensions (Width x Depth x Height) 440*230*44mm
Weight (Full-Loaded) ≤3kg
Environmental Requirements Working temperature: -10°C~50°C
Storage temperature: -40°C~70°C
Relative humidity: 10%~90%, non-condensing

Детальные характеристики

L2 Features MAC 8K MAC
MAC Black Hole
Port MAC Limit
VLAN 4K VLAN entries
Port QinQ
PVLAN to realize port isolation and saving public-vlan resources
GVRP
Spanning Tree STP/RSTP/MSTP
Remote loop detecting
Port Bi-directional bandwidth control
Static link aggregation and LACP(Link Aggregation Control Protocol)
Port mirroring
Security Feature User’s Security Anti-ARP-spoofing
Anti-ARP-flooding
IP Source Guard create IP+VLAN+MAC+Port binding
Port Isolation
MAC address binding to the port and MAC address filtering
IEEE 802.1x and AAA/Radius authentication
Device Security Anti-DOS attack(such as ARP, Synflood, Smurf, ICMP attack), ARP
detection, worm and Msblaster worm attack
SSHv2 Secure Shell
SNMP v3 encrypted management
Security IP login through Telnet
Hierarchical management and password protection of users
Network Maintenance Dynamic ARP table-based binding
IP+VLAN+MAC+Port binding
L2 to L7 ACL flow filtration mechanism on the 80 bytes of the head of user-defined packet
Port-based broadcast/multicast suppression and auto-shutdown risk port
DHCP Option82 and PPPoE+ upload user’s physical location
Service Features ACL 270 standard and extended ACLs
Time Range ACL
Flow classification and flow definition based on source/destination MAC address, VLAN, 802.1p, ToS, DiffServ, source/destination IP(IPv4/IPv6) address, TCP/UDP port number, protocol type, etc
packet filtration of L2~L7 deep to 80 bytes of IP packet head
ACL flexible control in the phases of vlan-lookup, ingress, egress
QoS Rate-limit to packet sending/receiving speed of port or self-defined flow
Packet mirror and redirection of interface and self-defined flow
Priority remark to port or self-defined flow and provide 802.1P, DSCP priority and Remark
Super queue scheduler based on port or self-defined flow. Each port flow supports 8 priority queues and scheduler of SP, WRR,
SP+WRR, etc.
Multicast IGMPv1/v2/v3 Snooping
IGMP Filter
MVR and cross VLAN multicast copy
IGMP Fast leave
IGMP Proxy
Reliability Loop Protection EAPS/ERPS/PVST and GERP (recover-time <50ms)
Loopback-detection
Link Protection FlexLink (recover-time <50ms)
RSTP/MSTP (recover-time <1s)
LACP (recover-time <10ms)
Device Protection Double fault-tolerant backup of host program and configuration files
Maintenance Network Maintenance Port real-time, utilization and transmit/receive statistic based on Telnet
LLDP
802.3ah Ethernet OAM
RFC 3164 BSD syslog Protocol
Ping and Traceroute
Device Management CLI, Console port, Telnet and WEB
SNMPv1/v2/v3
RMON (Remote Monitoring)1,2,3,9 groups MIB
NTP
NGBNView

L2 GCOM S5110-28TC firmware

Загрузить

Firmware

GCOM S5110-28TC datasheet

Загрузить

GCOM S5110-28TC datasheet

Switch Configuration Guide

Загрузить

Switch Configuration Guide

Software manual_Part 1

Загрузить

Software manual_Part 1

Software manual_Part 2

Загрузить

Software manual_Part 2