Коммутатор управляемый L3 GCOM S6300-26XQ


Данная модель включена в Подменный Фонд

  • 24*10GE SFP+
  • 2*40GE QSFP
  • Forwarding Capacity — 480Mpps
  • Backplane — 640Gbps
  • Энергопотребление — ≤130W
  • Блок вентиляторов с возможностью горячей замены
  • 1+1 резервирование по питанию
  • Поддержка стекирования

Коммутатор управляемый L3 GCOM S6300-26XQ — коммутатор с высокой плотностью портов и всем необходимым  набором функций уровня  L3. GCOM S6300-26XQ имеет на борту 24*10GE SFP+  и 2*40GE QSFP портов для организации аплинков.

Поддерживает стекирование и 3 вентиляторы (с возможность горячей замены), и весь необходимый набор функций для организации качественного сервиса, а так же функцию диагностики кабеля, DDM и защиту от статики. GCOM S6300-26XQ использует высокопроизводительный процессор для обеспечения максимальной скорости пересылки и создания линий для NGBN (New Generation Backbone Network), имеет широкие возможности ACL, привязки IP + MAC + port и многое другое.

КОМПЛЕКТАЦИЮ БЛОКОВ ПИТАНИЯ (AC/DC) УТОЧНЯЙТЕ У МЕНЕДЖЕРОВ

 


Share it:

Коммутатор управляемый L3 GCOM S6300-26XQ

Основные характеристики:

Backplane capacity 640Gbps
Switching capacity 512Gbps
Throughput (IPv4/IPv6) 480Mpps
Memory and storage 1024MB DDR2 SDRAM Memory and 16MB Flash Memory
Redundancy design 1+1 hot-swap redundant power
Power supply AC:Input 100~240V,50~60Hz;
DC:Input -36V~-72V;
Power consumption Full-load ≤130W
Outline dimensions 437mm×360mm×44mm
Weight (in maximum configuration) ≤8.5kg
Environmental requirements Working temperature:0°C~55°C
Storage temperature:-20°C~70°C
Relative humidity:10%~90%,no condensing
Electromagnetic compatibility

Детальные характеристики:

L2 features MAC 128K MAC address
MAC Black Hole
Port MAC Limit
Source MAC filtration
VLAN 4K VLAN entries
Port-based/MAC-based/IP subnet-based VLAN
Port-based QinQ and Selective QinQ (StackVLAN)
1:1 and N:1 VLAN
VLAN Swap and VLAN Remark
PVLAN to realize port isolation and saving public-vlan resources
GVRP
Spanning tree protocol IEEE802.1D Spanning Tree Protocol (STP)
IEEE802.1w Rapid Spanning Tree Protocol (RSTP)
IEEE802.1s Multiple Spanning Tree Protocol instances (MSTP)
Remote loop detecting
BPDU protection
Root protection
RRPP ring topology
RRPP instance
Port Bi-directional bandwidth control
Static link aggregation and LACP(Link Aggregation Control Protocol)
Port mirroring and traffic mirroring
Security features User’s security Anti-ARP-spoofing
Anti-ARP-flooding
IP Source Guard create IP+VLAN+MAC+Port binding
Port Isolation
MAC address binds to port and port MAC address filtration
IEEE 802.1x and AAA/Radius authentication
Device security Anti-DOS attack(such as ARP,Synflood, Smurf, ICMP attack), ARP detection, worm and Msblaster worm attack
SSHv2 Secure Shell
SNMP v3 encrypted management
Security IP login through Telnet
Hierarchical management and password protection of users
Network security User-based MAC and ARP traffic examination
Restrict ARP traffic of each user and force-out user with abnormal ARP traffic
Dynamic ARP table-based binding
IP+VLAN+MAC+Port binding
L2 to L7 ACL flow filtration mechanism on the 80 bytes of the head of user-defined packet
Port-based broadcast/multicast suppression and auto-shutdown risk port
URPF to prevent IP address counterfeit and attack
DHCP Option82 and PPPoE+ upload user’s physical location
Plaintext authentication of OSPF、RIPv2 and BGPv4 packets and MD5 cryptograph authentication
IP routing IPv4 ARP Proxy
DHCP Relay
DHCP Server
Static route
RIPv1/v2
OSPFv2
BGPv4
ECMP
Strategy route
Route policy
MPLS/MPLS VPN/VPLS
VxLAN/NVGRE/GENEVE
IPv6 MLD Snooping
IPv6 telnet
DHCPV6 Snooping
IPv6 ACL
IPv6 Web management
ospfv2/v3
ripv1/v2
pim-dm/pim-sm/pim-ssm
igmp/igmp-proxy
bgp4
mld/mld-proxy
ldp/mpls
DHCPv6 relay/Server/client
isis4
Static route
Vrrp
mail-alarm
syslog
pppoeplus
urpf
sntp
ping/ping6
Service features ACL Standard and extended ACL
Time Range ACL
Rate-limit on sending and receiving packet on port
Packet redirection
Port-based flow-control
Two-speed three-color CAR
Packet filter providing filtering based on source/destination MAC address, source/destination IP address, port, protocol, VLAN, VLAN range, MAC address range, or invalid frame
Packet filtration of L2~L7 even deep to 80 bytes of IP packet head
QoS Rate-limit to packet sending/receiving speed of port or self-defined flow and provide general flow monitor and two-speed tri-color monitor of self-defined flow
Priority remark to port or self-defined flow and provide 802.1P, DSCP priority and Remark
CAR(Committed Access Rate)、Traffic Shaping and flow statistics
Packet mirror and redirection of interface and self-defined flow
Super queue scheduler based on port and self-defined flow. Each port/ flow supports 8 priority queues and scheduler of SP, WRR and SP+WRR.
Congestion avoid mechanism,including Tail-Drop and WRED
Multicast IGMPv1/v2/v3
IGMPv1/v2/v3 Snooping
IGMP Filter
MVR and cross VLAN multicast copy
IGMP Fast leave
IGMP Proxy
PIM-SM/PIM-DM/PIM-SSM
PIM-SMv6、PIM-DMv6、PIM-SSMv6
MLDv2/MLDv2 Snooping
MSDP
Reliability Loop protection EAPS and GERP (recover-time <50ms)
Loopback-detection
Link protection FlexLink (recover-time <50ms)
RSTP/MSTP (recover-time <1s)
LACP (recover-time <10ms)
BFD
Device protection VRRP host backup
Double fault-tolerant backup of host program and configuration file
1+1 power hot backup
Maintenance Network maintenance Telnet-based statistics
RFC3176 sFlow
LLDP
802.3ah Ethernet OAM
RFC 3164 BSD syslog Protocol
Ping and Traceroute
Device management Command-line interface(CLI), Console, Telnet and WEB configuration
System configuration with SNMPv1/v2/v3
RMON (Remote Monitoring)1/2/3/9 groups of MIB
NTP(Network Time Protocol)
GN.LinkⅡ Server
NGBNView network management
WEB-based network management
Ping and Traceroute

L3 GCOM S6300-26XQ firmware

Загрузить

Firmware

GCOM S6300-26XQ datasheet

Загрузить

GCOM S6300-26XQ datasheet

Switch Configuration Guide

Загрузить

Switch Configuration Guide

Software manual_Part 1

Загрузить

Software manual_Part 1

Software manual_Part 2

Загрузить

Software manual_Part 2