Комутатор керований L2 GCOM S2600-28TC


  • 24 * 10 / 100Base-T портів
  • 4 * GE Combo портів
  • 16K MAC address
  • Швидкість пересилання – 9.6Mpps
  • Комутаційна ємність – 40Gbps
  • Енергоспоживання – 28W
  • Тип живлення AC / DC

 

 

S2600-28TC є комутатором рівня доступу з високою щільністю портів і набором функцій L2.
Комутатор GCOM S2600-28TC має на борту 24 порти 10 / 100Base-T, 4 * GE Combo портів (підтримка 100 / 1000BaseX SFP або 100 / 1000BaseT). Підтримує необхідний набір функцій для організації якісного сервісу, а також має функцію діагностики кабелю, DDM і захист від статики.


Share it:

Основні характеристики:

Backplane capacity 40Gbps
Interface switching capacity 12.8Gbps
Forwarding capacity 9.6Mpps
Power consumption ≤28W
Dimensions (width x depth x height)) 440mmx220mmx44mm
Weight (Full-loaded) ≤3.5kg
Power supply AC: 100~240V, 50~60Hz        DC: -36V~-72V
Environmental requirements Working temperature: -25°C~50°C
Storage temperature: -40°C~70°C
Relative humidity: 10%~90%, non-condensing

Детальні характеристики:

L2 features MAC 16K MAC address
IP + MAC + port binding
ARP anti-attack
Aging time and add/remove static MAC
MAC Black Hole
Port MAC Limit
Disable MAC address learning on port or channel-group
VLAN 4K VLAN entries.
Port-based and MAC-based VLAN
PrivateVLAN
Port-isolation in a VLAN
Port QinQ and selective QinQ
1:1 and N:1 VLAN switching
Port Bidirectional bandwidth control, configure entry/exit
Storm-control on port, configure broadcast/multicast/unknown unicast
Static and LACP, configure 14/30 groups and 8 members port each group
Port- mirroring of 1:1 or N:1
Ring STP/RSTP/MSTP
Remote-loop-detect
Security features User’s security ARP anti-Flooding, configure ARP traffic safety threshold and inhibition ARP packet
ARP anti-Spoofing , configure ARP inner and outer MAC check and static ARP checklist and drop / flood action
IP Source Guard, auto-create
IP+MAC+port+VLAN binding table
IEEE 802.1x and AAA/Radius authentication
IP+MAC+port+VLAN binding manually
Port Isolation
Bind MAC address to port and MAC address filtration on port
Network security User-based ARP abnormal traffic filtration
Auto-shutdown port in storm
Update user’s location through DHCP Option82 and PPPoE+
Port-based broadcast/multicast/unknown unicast suppression
L2-L4 ACL flow filtration
Device security Anti-DOS attack
SSHv2 Secure Shell
SNMP v3 encryption
Telnet based on Security IP
Prevent unauthorized user
Service features ACL Activate 1K/460 standard and extended ACL at the same time
Port/VLAN/global-based ACL and Time Range-based ACL strategy
CAR and ACL in the dynamic AAA
QoS 4 /8 queues with different priorities on each interface, configure the algorithms of SP, WRR, and SP+WRR
Flow classification based on SMAC,DMAC,VLAN,SIP,DIP,IP protocol, port number and CoS
Traffic priority definition and packet re-direction
Multicast 1K L2 multicast groups
IGMPv1/v2/v3 Snooping
IGMP Filter/Fast leave/cross-VLAN duplication
MLDv2/MLDv2 Snooping
Reliability Loop protection EAPS and ERRP
Loopback-detection
Link protection FlexLink (recover-time <50ms)
RSTP/MSTP (recover-time <1s)
LACP (recover-time <10ms)
Device protection Dual fault tolerance backup of host application and configuration file
provide 12V RPS redundant power supply interface, accept customization
Support to be configured with user-specified configuration
Strictly follow the relevant standards, and other mainstream manufacturers fully interoperability
Maintenance Network maintenance Port real-time, utilization and transmit/receive statistic based on CLI
LLDP
802.3ah Ethernet OAM
Syslog and RFC 3164 BSD syslog Protocol
Ping and Traceroute
Device management CLI, Console port, Telnet and WEB management
SNMPv1/v2/v3
RMON (Remote Monitoring)1,2,3,9 MIB
NTP
GN.LinkⅡ Server
NGBNView network management

L2 GCOM S2600-28TC firmware

Download

Firmware

Switch Configuration Guide

Download

Configuration Guide

Software manual_Part 1

Download

Software manual

Software manual_Part 2

Download

Software manual

GCOM S2600-28ТС datasheet

Download

S2600-28ТС datasheet