Основні характеристики:
Backplane capacity | 18Gbps |
Interface switching capacity | 3.6Gbps |
Forwarding capacity | 2.7Mpps |
Port | 8*10/100Base-T,2*ComboGE(100/1000Base-X SFP or 10/100/1000Base-T) |
Power consumption | Full-loaded≤14W (without POE) |
Idle≤8W | |
Dimensions (width x depth x height)) | 330mm×220mm×44mm |
Weight (Full-loaded) | ≤2.5kg |
Power | Input AC : 90~264V, 47~63Hz |
PoE Power supply | 127W |
POE features | 8/16/24*Base-T support POE, use data cable 1,2,3,6 to supply power,satisfy for 802.3at Alternative A. |
Satisfy 802.3af standard and 802.3at standard,max power consumption of single port is 32/40W. | |
S2600-10PC provides full-loaded 8 ports 802.3af(15.4W) or 4 ports 802.at(26W)to supply power | |
Environmental requirements | Operating Temperature:-15°C~55°C Storage Temperature:-40°C~70°C |
Relative humidity:10%~90%,non-condensing |
Детальні характеристики:
L2 features | MAC | 16K MAC address |
Aging time and add/remove static MAC by manual | ||
MAC Black Hole | ||
Port MAC Limit | ||
Disable MAC address learning on port or channel-group | ||
MAC filtration | ||
VLAN | 4K VLAN entries. | |
Port-based and protocol-based MAC VLAN | ||
QinQ | ||
Port | Bidirectional bandwidth control, configure entry/exit and the smallest 64K control particle | |
Storm-control on port, configure broadcast/multicast/unknown unicast | ||
Static and LACP, configure 30 groups and 8 members port each group | ||
Port- mirroring of 1:1 or N:1and remote port-mirroring | ||
Ring | STP/RSTP/MSTP | |
Remote-loop-detect | ||
Security features | User’s security | ARP anti-Flooding, configure ARP traffic safety threshold and inhibition ARP packet |
ARP anti-Spoofing, configure ARP inner and outer MAC check and static ARP checklist and drop / flood action | ||
IP Source Guard, auto-create IP+MAC+port+VLAN binding table | ||
IEEE 802.1x and AAA/Radius authentication | ||
IP+MAC+port+VLAN binding manually | ||
Port Isolation, configure hardware isolation of each port | ||
Bind MAC address to port and MAC address filtration on port | ||
Network security | User-based ARP abnormal traffic filtration | |
Auto-shutdown port in storm | ||
Update user’s location through DHCP Option82 and PPPoE+ | ||
Port-based broadcast/multicast/unknown unicast suppression | ||
L2-L4 ACL flow filtration | ||
Device security | Anti-DOS attack | |
SSHv2 Secure Shell | ||
SNMP v3 encryption | ||
Telnet based on Security IP | ||
Prevent unauthorized user | ||
Service features | ACL | Activate 460 standard and extended ACL at the same time |
Port/VLAN/global-based ACLand Time Range-based ACL strategy | ||
CAR and ACL in the dynamic AAA | ||
QoS | 8 queues with different priorities on each interface | |
Flow classification based on SMAC、DMAC、VLAN、SIP、DIP、IP protocol, port number and CoS | ||
Traffic priority definition and packet re-direction | ||
Multicast | 1K L2 multicast groups | |
IGMPv1/v2/v3 Snooping | ||
IGMP Filter/Fast leave/cross-VLAN duplication | ||
MLDv2/MLDv2 Snooping | ||
Reliability | Loop protection | EAPS and GERP |
Loopback-detection | ||
Link protection | FlexLink | |
RSTP/MSTP | ||
LACP | ||
Maintenance | Network maintenance | Port real-time, utilization and transmit/receive statistic based on CLI |
LLDP | ||
802.3ah Ethernet OAM | ||
Syslog and RFC 3164 BSD syslog Protocol | ||
Ping and Traceroute | ||
Device management | CLI, Console port, Telnet and WEB management | |
SNMPv1/v2/v3 | ||
RMON (Remote Monitoring)1,2,3,9 MIB | ||
SNTP | ||
GN.LinkⅡ Server | ||
NGBNView network management |