Категорії: ,

Комутатор керований L2 GCOM S5100-28PC


20 * 10/100 / 1000Base-T портів з підтримкою POE
4 * Combo GE
16K Jumbo, 8K MAC address, 4K VLAN, QinQ
256ACL з прив'язкою IP + MAC + Port + VLAN
Максимальне енергоспоживання без POE до 30 W
Стандарти POE 802.3af і 802.3at
Максимальна потужність до 32W на порт або до 400W на комутатор

Комутатор серії S5100 з POE – це нове покоління інтелектуальних гігабітних комутаторів операторського класу. Будучи провідним високопродуктивним комутатором POE, комутатори серії S5100 забезпечують великі ємності, високу щільність GE-портів, що повністю задовольняє попит клієнтів економічно ефективним гігабітним доступом. Комутатори S5100 POE задовольняють стандарту IEEE 802.3af і 802.3at. Максимальна споживана потужність кожного порту становить 32 Вт, а вся споживана потужність може досягати 400 Вт.


Share it:

Основні характеристики:

Backplane capacity 68Gbps
Interface switching capacity  56Gbps
Forwarding Capacity 41.7Mpps
Memory and Storage 64MB SDRAM memory and 8MB flash
POE features  Satisfy 802.3af and 802.3at standard, max power consumption supply of single port is 32W
Power Consumption Full-loaded≤30W (without POE)
Idle≤22W
Dimensions (Width x Depth x Height) 440mm*44mm*359mm
Weight (Full-Loaded) ≤5kg
Environmental Requirements Working temperature:-15°C~55°C
Storage temperature:-40°C~70°C
Relative humidity:10%~90%,non-condensing

Детальні характеристики:

L2 Features MAC 8K MAC address
MAC Black Hole
Port MAC Limit
VLAN 4K VLAN entries
Port based QinQ
PVLAN to realize port isolation and saving public-vlan resources
GVRP
Spanning Tree STP/RSTP/MSTP
Remote loop detecting
Port Bidirectional bandwidth control, configure entry/exit and the smallest 64K
control particle
Static and LACP
Port- mirroring of 1:1 or N:1
Security Feature User’s Security ARP anti-Flooding, configure ARP traffic safety threshold and inhibition
ARP packet
ARP anti-Spoofing, configure ARP inner and outer MAC check and static
ARP checklist and drop / flood action
IP+MAC+port+VLAN binding manually
Port Isolation, configure hardware isolation of each port 文
Bind MAC address to port and MAC address filtration on port
IEEE 802.1x and AAA/Radius authentication
Device Security Anti-DOS attack
SSHv2 Secure Shell
SNMP v3 encryption
Telnet based on Security IP
Prevent unauthorized user
Network Maintenance One button binding based on dynamic ARP table
Manual binding parameter of IP 、VLAN ID、MAC and port etc.
L2-L7 ACL flow filtration
Auto-shutdown port in storm
Update user’s location through DHCP Option82 and PPP
Service Features ACL Activate standard and extended ACL
Time Range ACL strategy
Flow classification based on SMAC、DMAC、VLAN、SIP、DIP、IP, IP(IPv4/IPv6) 、TCP/UDP port num、 protocol type etc.
Packet filtration of L2~L7 IP header with 80bytes
QoS Rate-limit to packet sending/receiving speed of port or self-defined flow and provide general flow monitor and two-speed tri-color monitor of self-defined flow
Packet mirror and redirection of interface and self-defined flow Supports
Priority remark to port or self-defined flow and provide 802.1P, DSCP priority and Remark
Super queue scheduler based on port and self-defined flow. Each port/flow supports 8 priority queues and scheduler of SP, WRR and SP+WRR
Multicast IGMPv1/v2/v3 Snooping
IGMP Filter
MVR multicast VLAN register and cross VLAN multicast replication
IGMP Fast leave
IGMP Proxy
Reliability Loop Protection EAPS and GERP
Loopback-detection
Link Protection FlexLink
RSTP/MSTP
LACP
Device Protection Backup of host program and configuration files
Maintenance Network Maintenance Port real-time, utilization and transmit/receive statistic based on CLI
Port real-time, utilization and transmit/receive statistic based on CLI
802.3ah Ethernet OAM
Syslog and RFC 3164 BSD syslog Protocol
Ping and Traceroute
Device Management CLI, Console port, Telnet and WEB
SNMPv1/v2/v3
RMON (Remote Monitoring)1,2,3,9 group MIB
NTP
GN.LinkⅡ Server
NGBNView network management

GCOM S5100-28PC manual

Download

Manual

GCOM S5100-28PC datasheet

Download

Datasheet